District · Gujarat
Tablet coating material supplied to Kheda and Anand districts
Nadiad and Vitthal Udyognagar, long established mid sized formulation manufacture.
Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.

What is made here
Nadiad, Vitthal Udyognagar and the surrounding estates carry mid sized formulation units, many of them family run and producing the same brands for decades.
Why our range fits it
A product that has looked the same for twenty years cannot start looking different because a coating supplier changed a pigment lot. Shade is matched to your reference sample and confirmed before release specifically so that a repeat order reproduces the batch you approved rather than a fresh interpretation of it.
How supply works
Road freight from Tahliwal.
Kheda and Anand districts is one of the places we supply in Gujarat. The state page covers the manufacturing belt as a whole; this one covers what is specific to Kheda and Anand districts.
Supplied from
- Works
- Plot No. 30, Industrial Area Tahliwal
- District
- Tehsil Haroli, Distt. Una 174507
- State
- Himachal Pradesh, India
- Delivering to
- Kheda and Anand districts, Gujarat
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Industries served
- PharmaceuticalDrugs and Cosmetics Act
- NutraceuticalFSSAI
- Ayurvedic and herbalSchedule T
- Formulation developmentR&D and FDD teams
- Contract manufacturingToll and third party
Grades
The 4 grades that matter most in Kheda and Anand districts.
Chosen against what Kheda and Anand districts manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.
Colour or white seal coat
Pigmented sub-coat where the seal layer also has to cover the core.
Colour or white seal coat for cores that need covering as well as sealing, so the finishing film coat can be applied at a lower build-up.
- Base ·
- Aqueous or non-aqueous
- Finish ·
- White or colour
Aqueous film coat, extra white
Water base extra white film coat for cores that show through a standard white.
Aqueous extra white film coat developed for tablets where the core colour bleeds through a conventional white film. Calcium and Azithromycin cores are the usual cases. It gives higher opacity at the same build-up.
- Base ·
- Aqueous
- Finish ·
- Extra white, high opacity
- Formulated against ·
- Calcium, Azithromycin
Sugar film coat material
Non-aqueous sucrose based system for a sugar coated finish without a full sugar line.
Non-aqueous sugar film coat that covers the tablet with a sucrose based solution and provides protection from light and moisture. It is fully formulated on HPMC, so a conventional or auto coater delivers the sugar coated appearance without the traditional multi stage sugar coating process.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Sugar coated appearance
Metallic and pearl film coat
Solvent base metallic and pearl effect film coats, supplied in the agreed shade.
The MNaq series is a non-aqueous ready-mix film coat that gives a metallic or pearl effect finish. Each shade carries its own code, and every code runs the same way on the coater. The shade is matched and confirmed against your reference sample before the batch is released, so a repeat order reproduces the finish you approved rather than a fresh interpretation of it.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Metallic or pearl, shade on reference
Read next
- Seal and Pre-CoatTransparent and coloured sub-coats that prepare the core for enteric or functional layers.
- Film Coating SystemAqueous and non-aqueous film coats, formulated to your application and regulatory requirement.
- Sugar CoatingFully formulated HPMC sucrose based systems for a classic sugar coated finish.
- Metallic and Pearl CoatingNon-aqueous metallic and pearl effect film coats, shade matched to your reference sample.
- Coating defects, and what causes themPicking, orange peel, twinning and colour variation traced back to the parameter that produces them.
- Coating dispersion calculatorA seal coat is made up thin, so solids loading is what decides the batch.
- Supplying manufacturers who exportThe documentation and pharmacopoeial references needed when the finished tablet leaves India.
- Send a requirementName the tablet, the target and the volume, and we quote for supply to Kheda and Anand districts the same working day.
Elsewhere in Gujarat, and beyond
- Ahmedabad
- Vadodara and Ankleshwar
- Gujarat
- Ankleshwar
- Bharuch district
- Valsad district
- Surat district
- Vadodara district
- Udham Singh Nagar district
- Sonipat district
- Alwar district
- Nadia district, Kalyani
- North 24 Parganas district
- Ernakulam district
- Panchkula district
- Dhar district, Pithampur
- Kangra district
- Baddi, Barotiwala and Nalagarh




