Manufacturing cluster · Himachal Pradesh
Tablet coating material supplied to Baddi, Barotiwala and Nalagarh
The largest pharmaceutical manufacturing belt in north India, and the closest to our works.
Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.
What is made here
The BBN belt runs several hundred manufacturing units across Solan district, weighted towards high volume generics. Antibiotics, analgesics, antacids, multivitamins and the proton pump inhibitor group are all made here at scale.
Why our range fits it
This is the cluster our range was shaped by. The moisture barrier grades exist because units here run Amoxycillin and Amoxycillin with Clavulanate. The enteric grades exist because they run the Pantoprazole group. When a customer here has a coating problem, we have usually seen the same core before.
How supply works
Our works at Tahliwal sit in Una district, the neighbouring district to Solan. This is the one cluster where a shade correction or a trial visit is a same day road trip rather than a courier cycle, which changes how quickly a problem gets solved.
Baddi, Barotiwala and Nalagarh is one of the places we supply in Himachal Pradesh. The state page covers the manufacturing belt as a whole; this one covers what is specific to Baddi, Barotiwala and Nalagarh.
Supplied from
- Works
- Plot No. 30, Industrial Area Tahliwal
- District
- Tehsil Haroli, Distt. Una 174507
- State
- Himachal Pradesh, India
- Delivering to
- Baddi, Barotiwala and Nalagarh, Himachal Pradesh
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Industries served
- PharmaceuticalDrugs and Cosmetics Act
- NutraceuticalFSSAI
- Ayurvedic and herbalSchedule T
- Formulation developmentR&D and FDD teams
- Contract manufacturingToll and third party
Grades
The 4 grades that matter most in Baddi, Barotiwala and Nalagarh.
Chosen against what Baddi, Barotiwala and Nalagarh manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.
Moisture barrier for Amoxycillin and Clavulanate
Solvent base extra white barrier film for the most moisture sensitive combination.
Moisture barrier film coat on a solvent base, extra white, developed for Amoxycillin and Clavulanate potassium tablets. Water ingress during and after coating drives degradation in that combination, and this grade is built to hold it out.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Extra white, moisture barrier
- Formulated against ·
- Amoxycillin and Clavulanate potassium
Extra white film coat for plain Amoxycillin
Solvent base extra white film for plain Amoxycillin and dissolution critical tablets.
Solvent base extra white film coat for plain Amoxycillin tablets and other products where dissolution has to be protected while the core is covered to a high opacity.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Extra white
- Formulated against ·
- Amoxycillin
Enteric coat, methacrylic base, non-aqueous
Solvent base methacrylic enteric film for the Pantoprazole group.
Methacrylic base enteric coating applied from a non-aqueous system, formulated for the Pantoprazole group and other dissolution critical enteric tablets. It runs best over a transparent seal coat such as SC-401, which protects the acid labile core.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Enteric film, gastro resistant
- Formulated against ·
- Pantoprazole group
Aqueous film coat, extra white
Water base extra white film coat for cores that show through a standard white.
Aqueous extra white film coat developed for tablets where the core colour bleeds through a conventional white film. Calcium and Azithromycin cores are the usual cases. It gives higher opacity at the same build-up.
- Base ·
- Aqueous
- Finish ·
- Extra white, high opacity
- Formulated against ·
- Calcium, Azithromycin
Read next
- Moisture Barrier CoatingHPMC and PVA based immediate release systems that protect against light, moisture and environmental gases.
- Enteric Coating SystemDelayed release polymers on methacrylic, phthalate and CAP bases for aqueous or organic processing.
- Film Coating SystemAqueous and non-aqueous film coats, formulated to your application and regulatory requirement.
- Coating defects, and what causes themPicking, orange peel, twinning and colour variation traced back to the parameter that produces them.
- Drying capacity calculatorMoisture sensitive cores are limited by what the bed can dry, not by how fast you can spray.
- Supplying manufacturers who exportThe documentation and pharmacopoeial references needed when the finished tablet leaves India.
- Send a requirementName the tablet, the target and the volume, and we quote for supply to Baddi, Barotiwala and Nalagarh the same working day.