Manufacturing cluster · Telangana
Tablet coating material supplied to Hyderabad
Bulk drug and formulations centre with a heavy export orientation.
Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.
What is made here
Hyderabad and the surrounding districts carry one of the largest concentrations of bulk drug manufacture in India, with formulation units and contract manufacturers alongside.
Why our range fits it
Where a filing names a specific polymer, substitution is a change control rather than a swap. We hold enteric grades on four separate polymer bases for that reason, including a CAP grade for dossiers that name it.
How supply works
Road freight from Tahliwal. Documentation ships with the consignment.
Hyderabad is one of the places we supply in Telangana. The state page covers the manufacturing belt as a whole; this one covers what is specific to Hyderabad.
Supplied from
- Works
- Plot No. 30, Industrial Area Tahliwal
- District
- Tehsil Haroli, Distt. Una 174507
- State
- Himachal Pradesh, India
- Delivering to
- Hyderabad, Telangana
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Industries served
- PharmaceuticalDrugs and Cosmetics Act
- NutraceuticalFSSAI
- Ayurvedic and herbalSchedule T
- Formulation developmentR&D and FDD teams
- Contract manufacturingToll and third party
Grades
The 4 grades that matter most in Hyderabad.
Chosen against what Hyderabad manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.
Enteric coat, CAP base
Cellulose acetate phthalate enteric film for Diclofenac and Serratiopeptidase.
CAP base enteric coating material for Diclofenac and Serratiopeptidase enteric tablets. It is the alternative polymer route to ECM-RP348 where a CAP film is specified.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Enteric film, gastro resistant
- Formulated against ·
- Diclofenac, Serratiopeptidase
Enteric coat, phthalate base
Phthalate base enteric system for Duloxetine enteric tablets.
Phthalate base enteric coating material formulated for Duloxetine enteric tablets, where the release profile is governed by the phthalate polymer rather than a methacrylic film.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Enteric film, gastro resistant
- Formulated against ·
- Duloxetine
Enteric coat, methacrylic second bond
Second bond methacrylic enteric system for Mesalamine.
Methacrylic base enteric coating on a second bond, formulated for Mesalamine enteric tablets where release has to be held until a defined point in the intestinal tract.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Enteric film, delayed release
- Formulated against ·
- Mesalamine
Enteric coat, methacrylic base, non-aqueous
Solvent base methacrylic enteric film for the Pantoprazole group.
Methacrylic base enteric coating applied from a non-aqueous system, formulated for the Pantoprazole group and other dissolution critical enteric tablets. It runs best over a transparent seal coat such as SC-401, which protects the acid labile core.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Enteric film, gastro resistant
- Formulated against ·
- Pantoprazole group
Read next
- Enteric Coating SystemDelayed release polymers on methacrylic, phthalate and CAP bases for aqueous or organic processing.
- Coating defects, and what causes themPicking, orange peel, twinning and colour variation traced back to the parameter that produces them.
- Coating weight gain calculatorWeight gain is the acceptance criterion for an enteric coat, so it is the number to plan the batch around.
- Supplying manufacturers who exportThe documentation and pharmacopoeial references needed when the finished tablet leaves India.
- Send a requirementName the tablet, the target and the volume, and we quote for supply to Hyderabad the same working day.