Skip to content
Rglax Pharma

Manufacturing cluster · Gujarat

Tablet coating material supplied to Ankleshwar

Bulk drug and intermediates belt along the GIDC estates south of Bharuch.

Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.

Request a trial quantityAll 22 grades
Coated tablets of the kind manufactured in Ankleshwar
The finishes most asked for in Ankleshwar, where solid oral dosage products are made. Illustration, not a photograph of stock.

What is made here

Ankleshwar and the neighbouring Panoli and Jhagadia estates are weighted towards bulk drugs, intermediates and specialty chemicals, with formulation units attached to several of the larger groups.

Why our range fits it

Solvent handling and area classification are already part of daily operation here, which makes the non-aqueous route practical rather than an obstacle. Where an aqueous film would compromise a moisture sensitive core, the solvent base grades are the straightforward answer rather than the difficult one.

How supply works

Road freight from Tahliwal, consolidated with other Gujarat supply.

Ankleshwar is one of the places we supply in Gujarat. The state page covers the manufacturing belt as a whole; this one covers what is specific to Ankleshwar.

Supplied from

Works
Plot No. 30, Industrial Area Tahliwal
District
Tehsil Haroli, Distt. Una 174507
State
Himachal Pradesh, India
Delivering to
Ankleshwar, Gujarat
Licence
NNZ/23/238
Compliance
WHO-GMP Compliance Unit

Industries served

  • PharmaceuticalDrugs and Cosmetics Act
  • NutraceuticalFSSAI
  • Ayurvedic and herbalSchedule T
  • Formulation developmentR&D and FDD teams
  • Contract manufacturingToll and third party
+91 98821 30484

Grades

The 4 grades that matter most in Ankleshwar.

Chosen against what Ankleshwar manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.

  • Non-aqueous film coat, white or colour

    Solvent base ready-mix film coat for moisture sensitive cores.

    Solvent base film coating for cores that cannot tolerate an aqueous process. It is supplied white or in your agreed shade, with the same finish characteristics as the aqueous grade at a lower bed temperature.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    White or colour, high gloss

  • Non-aqueous film coat, extra white

    Solvent base extra white film coat for high opacity cover on sensitive cores.

    Non-aqueous extra white film coat for moisture sensitive tablets that also need high opacity. It combines a solvent process with the covering power of the Wt10 series.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Extra white, high opacity

  • Enteric coat, methacrylic base, non-aqueous

    Solvent base methacrylic enteric film for the Pantoprazole group.

    Methacrylic base enteric coating applied from a non-aqueous system, formulated for the Pantoprazole group and other dissolution critical enteric tablets. It runs best over a transparent seal coat such as SC-401, which protects the acid labile core.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Enteric film, gastro resistant
    Formulated against ·
    Pantoprazole group

  • Moisture barrier for Amoxycillin and Clavulanate

    Solvent base extra white barrier film for the most moisture sensitive combination.

    Moisture barrier film coat on a solvent base, extra white, developed for Amoxycillin and Clavulanate potassium tablets. Water ingress during and after coating drives degradation in that combination, and this grade is built to hold it out.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Extra white, moisture barrier
    Formulated against ·
    Amoxycillin and Clavulanate potassium

Read next

Elsewhere in Gujarat, and beyond

All 71 locations
Call usWhatsApp