Skip to content
Rglax Pharma

Manufacturing cluster · Maharashtra

Tablet coating material supplied to Pune

Newer automated plants across Chakan, Ranjangaon and the Pimpri belt.

Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.

Request a trial quantityAll 22 grades
Coated tablets of the kind manufactured in Pune
The finishes most asked for in Pune, where nutraceutical products are made. Illustration, not a photograph of stock.

What is made here

The estates around Chakan, Ranjangaon and Pimpri Chinchwad carry formulation and nutraceutical manufacture, with a higher share of recently built, automated plant than the older belts.

Why our range fits it

Automated coaters run large charges at low pan speed, which puts the drying rather than the spray rate at the limit. Those are the 36 and 48 inch columns of our parameter table, and the figures there are the ones we confirm during scale-up on your equipment.

How supply works

Road freight from Tahliwal.

Pune is one of the places we supply in Maharashtra. The state page covers the manufacturing belt as a whole; this one covers what is specific to Pune.

Supplied from

Works
Plot No. 30, Industrial Area Tahliwal
District
Tehsil Haroli, Distt. Una 174507
State
Himachal Pradesh, India
Delivering to
Pune, Maharashtra
Licence
NNZ/23/238
Compliance
WHO-GMP Compliance Unit

Industries served

  • PharmaceuticalDrugs and Cosmetics Act
  • NutraceuticalFSSAI
  • Ayurvedic and herbalSchedule T
  • Formulation developmentR&D and FDD teams
  • Contract manufacturingToll and third party
+91 98821 30484

Grades

The 4 grades that matter most in Pune.

Chosen against what Pune manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.

  • Aqueous film coat, white or colour

    Water base ready-mix film coat supplied white or in your agreed shade.

    General purpose aqueous film coating for immediate release tablets. It is dispersed in purified water and applied as a white or coloured film coat, giving a smooth, glossy surface with well defined logo definition.

    Base ·
    Aqueous
    Finish ·
    White or colour, high gloss

  • Moisture barrier for multivitamin and ferrous tablets

    Solvent base barrier film for hygroscopic multivitamin and iron formulations.

    Solvent base moisture barrier film coat for Multivitamin and Ferrous group tablets. It protects the core from moisture pick-up and from the colour change that follows it on shelf.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Colour or white, moisture barrier
    Formulated against ·
    Multivitamins, Ferrous group

  • Enteric coat, methacrylic base, aqueous

    Water base methacrylic enteric film for Diclofenac and Serratiopeptidase.

    Methacrylic base enteric coating for an aqueous process, formulated for Diclofenac and Serratiopeptidase enteric tablets. It takes solvent handling out of the enteric stage wherever the core allows a water base process.

    Base ·
    Aqueous
    Finish ·
    Enteric film, gastro resistant
    Formulated against ·
    Diclofenac, Serratiopeptidase

  • Sustained release material

    Ready-mix blend for extended release solid dosage forms.

    Sustained release material for controlled release drug delivery systems. It is supplied as a ready-mix so the release profile is reproducible batch to batch without in-house polymer blending.

    Base ·
    Dry blend
    Finish ·
    Functional release layer

Read next

Elsewhere in Maharashtra, and beyond

All 71 locations
Call usWhatsApp