Skip to content
Rglax Pharma

State · Punjab

Tablet coating material supplied to Punjab

Formulations and nutraceutical manufacture across the Mohali and Ludhiana belts.

Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.

Request a trial quantityAll 22 grades
Coated tablets of the kind manufactured in Punjab
The finishes most asked for in Punjab, where nutraceutical products are made. Illustration, not a photograph of stock.

What is made here

Mohali, Derabassi, Ludhiana and Jalandhar carry formulation units and a substantial nutraceutical sector, sitting close to the Himachal belt.

Why our range fits it

Punjab units often run the same product mix as our neighbouring Himachal customers, which means the grades that solve problems in Baddi usually solve the same problems here.

How supply works

Direct road supply from Tahliwal, one of our shortest routes.

Supplied from

Works
Plot No. 30, Industrial Area Tahliwal
District
Tehsil Haroli, Distt. Una 174507
State
Himachal Pradesh, India
Delivering to
Punjab, Punjab
Licence
NNZ/23/238
Compliance
WHO-GMP Compliance Unit

Industries served

  • PharmaceuticalDrugs and Cosmetics Act
  • NutraceuticalFSSAI
  • Ayurvedic and herbalSchedule T
  • Formulation developmentR&D and FDD teams
  • Contract manufacturingToll and third party
+91 98821 30484

Grades

The 4 grades that matter most in Punjab.

Chosen against what Punjab manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.

  • Moisture barrier for Amoxycillin and Clavulanate

    Solvent base extra white barrier film for the most moisture sensitive combination.

    Moisture barrier film coat on a solvent base, extra white, developed for Amoxycillin and Clavulanate potassium tablets. Water ingress during and after coating drives degradation in that combination, and this grade is built to hold it out.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Extra white, moisture barrier
    Formulated against ·
    Amoxycillin and Clavulanate potassium

  • Moisture barrier for multivitamin and ferrous tablets

    Solvent base barrier film for hygroscopic multivitamin and iron formulations.

    Solvent base moisture barrier film coat for Multivitamin and Ferrous group tablets. It protects the core from moisture pick-up and from the colour change that follows it on shelf.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Colour or white, moisture barrier
    Formulated against ·
    Multivitamins, Ferrous group

  • Aqueous film coat, extra white

    Water base extra white film coat for cores that show through a standard white.

    Aqueous extra white film coat developed for tablets where the core colour bleeds through a conventional white film. Calcium and Azithromycin cores are the usual cases. It gives higher opacity at the same build-up.

    Base ·
    Aqueous
    Finish ·
    Extra white, high opacity
    Formulated against ·
    Calcium, Azithromycin

  • Enteric coat, methacrylic base, non-aqueous

    Solvent base methacrylic enteric film for the Pantoprazole group.

    Methacrylic base enteric coating applied from a non-aqueous system, formulated for the Pantoprazole group and other dissolution critical enteric tablets. It runs best over a transparent seal coat such as SC-401, which protects the acid labile core.

    Base ·
    Non-aqueous (solvent)
    Finish ·
    Enteric film, gastro resistant
    Formulated against ·
    Pantoprazole group

Read next

Elsewhere in Punjab, and beyond

All 71 locations
Call usWhatsApp