Manufacturing cluster · Uttarakhand
Tablet coating material supplied to Dehradun, Haridwar and Roorkee
The Uttarakhand industrial belt, north India’s second major pharmaceutical cluster.
Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.
What is made here
The SIDCUL estates at Haridwar, Roorkee and Selaqui carry formulation units producing oral solids at volume, alongside a significant ayurvedic and herbal sector.
Why our range fits it
Herbal and ayurvedic cores are frequently dark, mottled and hygroscopic. The extra white film coats cover them at lower build-up, the pigmented seal coat reduces how much white film is needed, and the adsorbent addresses moisture before compression rather than after.
How supply works
Road freight from Tahliwal across the north Indian belt.
Dehradun, Haridwar and Roorkee is one of the places we supply in Uttarakhand. The state page covers the manufacturing belt as a whole; this one covers what is specific to Dehradun, Haridwar and Roorkee.
Supplied from
- Works
- Plot No. 30, Industrial Area Tahliwal
- District
- Tehsil Haroli, Distt. Una 174507
- State
- Himachal Pradesh, India
- Delivering to
- Dehradun, Haridwar and Roorkee, Uttarakhand
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Industries served
- PharmaceuticalDrugs and Cosmetics Act
- NutraceuticalFSSAI
- Ayurvedic and herbalSchedule T
- Formulation developmentR&D and FDD teams
- Contract manufacturingToll and third party
Grades
The 4 grades that matter most in Dehradun, Haridwar and Roorkee.
Chosen against what Dehradun, Haridwar and Roorkee manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.
Aqueous film coat, extra white
Water base extra white film coat for cores that show through a standard white.
Aqueous extra white film coat developed for tablets where the core colour bleeds through a conventional white film. Calcium and Azithromycin cores are the usual cases. It gives higher opacity at the same build-up.
- Base ·
- Aqueous
- Finish ·
- Extra white, high opacity
- Formulated against ·
- Calcium, Azithromycin
Colour or white seal coat
Pigmented sub-coat where the seal layer also has to cover the core.
Colour or white seal coat for cores that need covering as well as sealing, so the finishing film coat can be applied at a lower build-up.
- Base ·
- Aqueous or non-aqueous
- Finish ·
- White or colour
Hygroscopic adsorbent material
Holds moisture off hygroscopic actives during compression and afterwards.
HR100 is a hygroscopic adsorbent material for hygroscopic drugs. It works effectively on Sodium Valproate, L-Carnitine, Valproate Sodium and other actives that pick up moisture and create problems during compression and afterwards.
- Base ·
- Dry blend
- Finish ·
- Excipient blend
- Formulated against ·
- Sodium Valproate, L-Carnitine, Valproate Sodium
Non-aqueous film coat, extra white
Solvent base extra white film coat for high opacity cover on sensitive cores.
Non-aqueous extra white film coat for moisture sensitive tablets that also need high opacity. It combines a solvent process with the covering power of the Wt10 series.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Extra white, high opacity
Read next
- Film Coating SystemAqueous and non-aqueous film coats, formulated to your application and regulatory requirement.
- Seal and Pre-CoatTransparent and coloured sub-coats that prepare the core for enteric or functional layers.
- Hygroscopic AdsorbentAdsorbent material for hygroscopic drugs that create problems during and after compression.
- Coating defects, and what causes themPicking, orange peel, twinning and colour variation traced back to the parameter that produces them.
- Spray rate calculatorThe rate the bed will take without picking or orange peel.
- Supplying manufacturers who exportThe documentation and pharmacopoeial references needed when the finished tablet leaves India.
- Send a requirementName the tablet, the target and the volume, and we quote for supply to Dehradun, Haridwar and Roorkee the same working day.