District · Haryana
Tablet coating material supplied to Panchkula district
Barwala and Raipur Rani, dense with small units working on loan licence.
Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.
What is made here
Barwala and Raipur Rani carry a high density of small formulation units, a large share of them manufacturing on loan licence for marketing companies that hold the product licence.
Why our range fits it
Under a loan licence the manufacturer and the licence holder are two different companies, so a change to the coating needs both to agree. That makes a documented grade worth more than a flexible one. A published code with published parameters is something both parties can approve without a meeting.
How supply works
Direct road supply from Tahliwal, on the edge of the Himachal belt.
Panchkula district is one of the places we supply in Haryana. The state page covers the manufacturing belt as a whole; this one covers what is specific to Panchkula district.
Supplied from
- Works
- Plot No. 30, Industrial Area Tahliwal
- District
- Tehsil Haroli, Distt. Una 174507
- State
- Himachal Pradesh, India
- Delivering to
- Panchkula district, Haryana
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Industries served
- PharmaceuticalDrugs and Cosmetics Act
- NutraceuticalFSSAI
- Ayurvedic and herbalSchedule T
- Formulation developmentR&D and FDD teams
- Contract manufacturingToll and third party
Grades
The 4 grades that matter most in Panchkula district.
Chosen against what Panchkula district manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.
Universal film coat
One grade that runs on either an aqueous or a solvent process.
Universal film coat material for units that run mixed processes and want to hold a single grade in stores. It can be dispersed in water or in solvent, so the same code covers both product lines.
- Base ·
- Aqueous or non-aqueous
- Finish ·
- White or colour
Colour or white seal coat
Pigmented sub-coat where the seal layer also has to cover the core.
Colour or white seal coat for cores that need covering as well as sealing, so the finishing film coat can be applied at a lower build-up.
- Base ·
- Aqueous or non-aqueous
- Finish ·
- White or colour
Aqueous film coat, white or colour
Water base ready-mix film coat supplied white or in your agreed shade.
General purpose aqueous film coating for immediate release tablets. It is dispersed in purified water and applied as a white or coloured film coat, giving a smooth, glossy surface with well defined logo definition.
- Base ·
- Aqueous
- Finish ·
- White or colour, high gloss
Aqueous film coat, extra white
Water base extra white film coat for cores that show through a standard white.
Aqueous extra white film coat developed for tablets where the core colour bleeds through a conventional white film. Calcium and Azithromycin cores are the usual cases. It gives higher opacity at the same build-up.
- Base ·
- Aqueous
- Finish ·
- Extra white, high opacity
- Formulated against ·
- Calcium, Azithromycin
Read next
- Film Coating SystemAqueous and non-aqueous film coats, formulated to your application and regulatory requirement.
- Seal and Pre-CoatTransparent and coloured sub-coats that prepare the core for enteric or functional layers.
- Coating defects, and what causes themPicking, orange peel, twinning and colour variation traced back to the parameter that produces them.
- Spray rate calculatorThe rate the bed will take without picking or orange peel.
- Supplying manufacturers who exportThe documentation and pharmacopoeial references needed when the finished tablet leaves India.
- Send a requirementName the tablet, the target and the volume, and we quote for supply to Panchkula district the same working day.