Coating system
Dissolution Profile Material
A blend added at the compression stage to correct disintegration time and dissolution where the core alone falls short.
- 1 gradeEach with its own data sheet
- Dry blendProcess base
- Parameters by pan sizePublished below
- WHO-GMP unitMade at Tahliwal, Una
What this range covers
Dissolution enhancer blends used to correct disintegration time and dissolution profiles where the core formulation on its own does not meet specification.
Range
- Grades held
- 1
- Process base
- Dry blend
- Brand
- Rglax Coat
- Made at
- Tahliwal, Distt. Una, H.P.
Grades in this range
1 grade, each with its own data sheet.
Common questions
When the core does not meet the specified disintegration time or dissolution profile and reformulating the core is not practical. It is added at the blending stage rather than applied as a coat.
Run disintegration and dissolution before and after addition on the same core. That separates the effect of the blend from ordinary batch to batch variation.
It is used where reformulating is not practical. If the core has a deeper problem than disintegration time, the blend corrects the symptom rather than the cause, and reformulation is still the better answer.
Before you specify a grade
Other coating systems
- Film coatingAqueous and non-aqueous film coats, formulated to your application and regulatory requirement.
- Enteric coatingDelayed release polymers on methacrylic, phthalate and CAP bases for aqueous or organic processing.
- Moisture barrierHPMC and PVA based immediate release systems that protect against light, moisture and environmental gases.
- Seal and pre-coatTransparent and coloured sub-coats that prepare the core for enteric or functional layers.
- Sugar coatingFully formulated HPMC sucrose based systems for a classic sugar coated finish.
- Metallic and pearlNon-aqueous metallic and pearl effect film coats, shade matched to your reference sample.
- Sustained releaseControlled release drug delivery blends for extended release solid dosage forms.
- Taste maskMasking the taste and odour of bitter actives in suspensions and dispersibles.
- Hygroscopic adsorbentAdsorbent material for hygroscopic drugs that create problems during and after compression.
Need help choosing a grade
Talk to our technical team.
Send the core composition, the shade reference and the coater you will run it on, and we will tell you which dissolution grade we would put on it.
From lab scale to commercial supply.