Skip to content
Rglax Pharma

Annexure II

Coating materials for every formulation.

Ready-mix tablet coating material, polymers and resins, listed by product code with the application each grade is formulated for. Open any code for full details.

  • 22 gradesAcross ten coating systems
  • 700 to 1,700 per kgIndicative, quoted firm
  • Parameters publishedOn every grade page
  • WHO-GMP unitLicence NNZ/23/238
Download the product list (PDF)Get a quote
Coated tablets from across the Rglax Coat range

Find a grade

Search by product code or by the active you are coating, then narrow by system or process base.

22 grades

  • 01Named active
    Aqueous film coat, extra white

    AQ-ZWt10

    Aqueous film coat, extra white

    Water base extra white film coat for cores that show through a standard white.

    Aqueous
  • 02Named active
    Enteric coat, methacrylic base, non-aqueous

    ECM-RP347

    Enteric coat, methacrylic base, non-aqueous

    Solvent base methacrylic enteric film for the Pantoprazole group.

    Non-aqueous (solvent)
  • 03Named active
    Enteric coat, methacrylic base, aqueous

    ECM-RP348

    Enteric coat, methacrylic base, aqueous

    Water base methacrylic enteric film for Diclofenac and Serratiopeptidase.

    Aqueous
  • 04Named active
    Enteric coat, phthalate base

    ECPT5

    Enteric coat, phthalate base

    Phthalate base enteric system for Duloxetine enteric tablets.

    Non-aqueous (solvent)
  • 05Named active
    Enteric coat, methacrylic second bond

    ECMS

    Enteric coat, methacrylic second bond

    Second bond methacrylic enteric system for Mesalamine.

    Non-aqueous (solvent)
  • 06Named active
    Enteric coat, CAP base

    EC714

    Enteric coat, CAP base

    Cellulose acetate phthalate enteric film for Diclofenac and Serratiopeptidase.

    Non-aqueous (solvent)
  • 07Named active
    Transparent seal coat and pre-coat

    SC-401

    Transparent seal coat and pre-coat

    Clear sub-coat laid down before an enteric layer on acid labile cores.

    Aqueous or non-aqueous
  • 08Named active
    Moisture barrier for Amoxycillin and Clavulanate

    CVS-101

    Moisture barrier for Amoxycillin and Clavulanate

    Solvent base extra white barrier film for the most moisture sensitive combination.

    Non-aqueous (solvent)
  • 09Named active
    Extra white film coat for plain Amoxycillin

    PA-Wt10

    Extra white film coat for plain Amoxycillin

    Solvent base extra white film for plain Amoxycillin and dissolution critical tablets.

    Non-aqueous (solvent)

Our coating systems

Explore by coating system

Each system page carries the grades in that range, the application parameters by pan size, and the actives those grades were formulated for.

Choosing a grade

By the active and by the polymer your filing names. ECM-RP347 is non-aqueous methacrylic for the Pantoprazole group, ECM-RP348 is the aqueous methacrylic route for Diclofenac and Serratiopeptidase, EC714 covers the same two actives on a CAP base, ECPT5 is phthalate base for Duloxetine, and ECMS is a second bond for Mesalamine.

There are two bands. Film, seal, sugar, metallic, moisture barrier and sustained release grades run the film coating band, which is 35 to 40 degrees at the bed for aqueous and 30 to 35 for non-aqueous. Every enteric grade runs cooler, at 30 to 32 degrees with a 45 to 50 degree inlet, because a hot bed costs you gastro resistance.

It can be developed against your specification. Send the core composition, the shade reference and the coating equipment details, and we formulate against them rather than fitting you to an existing code.

RT-114, RT314 and HR100 go in at the blending stage rather than through a coater. The taste mask goes into the suspension formulation, the dissolution enhancer corrects disintegration time and dissolution, and the hygroscopic adsorbent is added ahead of compression.

Before you specify

Reference material

The vocabulary, the failure modes and the chemistry underneath the grades.

Grades not listed here can be developed against your specification. Send us your requirement with the core composition, shade reference and coating equipment details.

Other ways into the range

Search by active

Find the right coating material for your application.

Popular actives

Ready to run on your pan

Request a trial or get a quote.

Tell us the core, the shade and the coater. A trial quantity goes out with the parameters the grade was developed on, before any commercial order.

Request a trialCompare grades

From trial to commercial supply.

Call usWhatsApp