State · Madhya Pradesh
Tablet coating material supplied to Madhya Pradesh
Central India manufacturing centred on the Indore and Pithampur belt.
Written by the Rglax Pharma technical team, who formulate and manufacture every grade named on this page at our WHO-GMP works in Tahliwal, Una (drug manufacturing licence NNZ/23/238). Reviewed 3 September 2026. Licences and certificates.
What is made here
Pithampur, Indore, Dewas and Mandideep carry formulation and contract manufacturing units producing for domestic and export supply.
Why our range fits it
Central India sits far from both coasts, so stock is held longer between order and use. Grades that do not require in-house blending hold their specification through that storage better than a two part system does.
How supply works
Road freight from Tahliwal.
Supplied from
- Works
- Plot No. 30, Industrial Area Tahliwal
- District
- Tehsil Haroli, Distt. Una 174507
- State
- Himachal Pradesh, India
- Delivering to
- Madhya Pradesh, Madhya Pradesh
- Licence
- NNZ/23/238
- Compliance
- WHO-GMP Compliance Unit
Industries served
- PharmaceuticalDrugs and Cosmetics Act
- NutraceuticalFSSAI
- Ayurvedic and herbalSchedule T
- Formulation developmentR&D and FDD teams
- Contract manufacturingToll and third party
Grades
The 4 grades that matter most in Madhya Pradesh.
Chosen against what Madhya Pradesh manufactures, not against what we would most like to sell. Each one links to its full page, with the process parameters it was developed on and the actives it was formulated for.
Sustained release material
Ready-mix blend for extended release solid dosage forms.
Sustained release material for controlled release drug delivery systems. It is supplied as a ready-mix so the release profile is reproducible batch to batch without in-house polymer blending.
- Base ·
- Dry blend
- Finish ·
- Functional release layer
Aqueous film coat, extra white
Water base extra white film coat for cores that show through a standard white.
Aqueous extra white film coat developed for tablets where the core colour bleeds through a conventional white film. Calcium and Azithromycin cores are the usual cases. It gives higher opacity at the same build-up.
- Base ·
- Aqueous
- Finish ·
- Extra white, high opacity
- Formulated against ·
- Calcium, Azithromycin
Transparent seal coat and pre-coat
Clear sub-coat laid down before an enteric layer on acid labile cores.
Transparent layer seal coat or pre-coat applied ahead of an enteric coat, specified for the Pantoprazole group. It isolates the core from the enteric polymer and gives the functional layer a uniform surface to build on.
- Base ·
- Aqueous or non-aqueous
- Finish ·
- Transparent
- Formulated against ·
- Pantoprazole group
Moisture barrier for multivitamin and ferrous tablets
Solvent base barrier film for hygroscopic multivitamin and iron formulations.
Solvent base moisture barrier film coat for Multivitamin and Ferrous group tablets. It protects the core from moisture pick-up and from the colour change that follows it on shelf.
- Base ·
- Non-aqueous (solvent)
- Finish ·
- Colour or white, moisture barrier
- Formulated against ·
- Multivitamins, Ferrous group
Read next
- Sustained Release SystemControlled release drug delivery blends for extended release solid dosage forms.
- Film Coating SystemAqueous and non-aqueous film coats, formulated to your application and regulatory requirement.
- Seal and Pre-CoatTransparent and coloured sub-coats that prepare the core for enteric or functional layers.
- Moisture Barrier CoatingHPMC and PVA based immediate release systems that protect against light, moisture and environmental gases.
- Coating defects, and what causes themPicking, orange peel, twinning and colour variation traced back to the parameter that produces them.
- Coating weight gain calculatorRelease rate follows the thickness of the layer, and thickness is measured as weight gain.
- Supplying manufacturers who exportThe documentation and pharmacopoeial references needed when the finished tablet leaves India.
- Send a requirementName the tablet, the target and the volume, and we quote for supply to Madhya Pradesh the same working day.